Kuhn FC 9530 D-FF rotary mower
≈ US$83,480
Kaunas
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+370 620 ...
Show
+370 620 34777
+370 620 ...
Show
+370 620 34888
Lithuania 
10 m
Lithuania, Kaunas
Lithuania, Babtų sen.
Lithuania, Babtų sen.
10 m
Germany, Hamburg
4 m
France, ILLKIRCH
Germany, Hamburg
3 m
France, ILLKIRCH
3.5 m
France, Aurice
Netherlands, Roosendaal
4.35 m
Germany, Cloppenburg
3 m
Germany, Ampfing
France, Aurice
3 m
Germany, Hamburg
3.1 m
Germany, Cloppenburg
France, Fr-56120 Josselin
3 m
Germany, De-21439 Marxen
France, Fr-55300 Chauvoncourt
3.2 m
Poland, Mordy
The machines are in very good working condition and fully prepared for work.
KUHN FC 9530 R-FF rear mower:
Working width in combination with front mower: 9.53 m
Overlap between front and rear mowers with 3.10 m front mower: 30–50 cm
Overlap between front and rear mowers with 3.50 m front mower: 50–70 cm
Transport width: 2.95 m
Cutterbar: OPTIDISC ELITE
Number of discs (individual mower width): 2 × 8
Quick-change blades: FAST-FIT
Cutting height with standard skids: 35 to 65 mm
Bearing protection with shear hub: PROTECTADRIVE
Ground following system: pendulum type
Suspension: LIFT-CONTROL hydropneumatic
Non-stop protection system
Conditioning system: SQUAREFLEX with two polyurethane rollers
Conditioner speed: 780 rpm
Average swath width: 2 × 1.85 / 2.4 m
Wide spreading system: standard
Headland management: hydraulic cylinder
Function control: lifting and transport position
Hitch: three-point linkage Cat. III and 4N
Parking position: folded or unfolded on parking stands
PTO speed: 1000 rpm
Overload protection: standard
Slip clutch: integrated in side skids
Required tractor power: 154 kW / 210 HP
Required tractor hydraulic connections: 2 double-acting
Required tractor electrical connections: 1 × 7-pin socket
Road lighting system: standard
Rear mower weight: 3330 kg
PTO shaft: 1 3/8" 6
Side skids for cutting height adjustment: 45–85 mm
KUHN FC 3525 R-FF front mower:
Working width: 3.5 m
Transport width: 3.48 m
Cutterbar: OPTIDISC ELITE
Number of discs with protective skids: 8
Blade fastening: FAST-FIT quick-change
Cutting height with standard skids: 35 to 65 mm
Top-access disc removal: standard
Cutterbar protection system with shear hub: PROTECTADRIVE
Ground following system: pivoting link arms
Suspension: LIFT-CONTROL hydropneumatic
Conditioner: SQUAREFLEX with two polyurethane rollers
Conditioner speed: 780 rpm
Conditioner drive with anti-blocking system
Approximate swath width: 1.4 to 2.0 m
Headland turning system: hydraulic cylinder
Hitch: three-point linkage Cat. II
PTO speed: 1000 rpm (clockwise viewed from tractor cab)
Slip clutch integrated in gearbox: standard
Theoretical required tractor power: 57 kW / 77 HP
Required tractor hydraulic connections: 1 single-acting
Required tractor electrical connections: 1 × 7-pin socket
Outline lighting: standard
Approximate weight: 1390 kg
PTO shaft: 1 3/8" 6
Side skids for cutting height adjustment: 45–85 mm
Machines located in Kaunas, Lithuania