Scanreco G3 Otto Canbus Proportional Control control button for forestry equipment
≈ US$3,429
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+48 663 39...
Show
+48 663 399 034
The kit is fitted to the customer's manifold type: Walvoil , Nordhydraulic, Hawe, Olsber or other PWM. We can use different types of connectors according to the customer's order: JPT, Deutsch, DIN etc.
--
Unleash the full potential of your forestry machinery with our OTTO Joysticks, designed and optimized for demanding forestry applications. Integrated with Stui Faber Communication technology, these joysticks deliver unmatched control and superior machine handling.
With OTTO Joysticks, you get an intuitive, ergonomic interface for precise control of your forestry machinery. Whether you are operating felling heads, forwarders, or harvesters, these joysticks offer smooth and reliable functionality.
Our OTTO Joysticks are engineered with durability in mind to withstand the challenging forest environment. They are resistant to dust, dirt, and moisture, ensuring their reliable operation even in the harshest conditions.
Stui Faber Communication integration further enhances their value. This technology offers seamless communication with your machinery, providing real-time feedback and ensuring optimum performance. It simplifies the interface, allowing operators to control machinery with improved accuracy and efficiency.
--
CANBus card for analog/digital inputs.
DESCRIPTION
MDCi is an electronic board with CANBus interface to
simulate 2 JC joysticks with 2 Otto joystick and push button dashboard.
The transmission has course immediately after the turning on of the
electronic card.
FEATURES
- supply voltage from 10 to 30 Vdc
- CAN V2.0B communication bus
- 120 Ohm inner terminator not present in this version
- 2 diagnostic LEDs (red and green)
- firmware updatable by integrated serial port
SIGNALS
Red LED flashing one time: short circuit error on the +5V stabilized output
Red LED flashing two times: one of the analog inputs has been found not at rest position during the turning on, this
input is blocked until a reset.
Green LED On: the electronic card is working correctly.
The green LED flashes one time every time an input (analog or on/off) change status.
MDCi contro unit for OTTO joystick interface
and button panel for Forest Crane
--
Technical Specifications of Canbus main driver:
Power Supply Voltage : 10Vdc÷30Vdc (inner 5x20 8A fuse type F8A)
Current absorpion : 300mA + load outputs (max 7.5A)
Wroking Temperature Range : -20 ÷+ 70 C
Supply for external poterntiometers: +5V - max current 50mA
PWM minimum current range : from 100 to 2500 mA
PweM maximum current range: from 100 to 2500mA
PWM frequency : 50-60-70-85-100-125-150-200-250-300 Hz
Analog inputs impedance: 11 KOhm towards 2.5V
Overlall dimensions with connector mounted: 256x210x45mm
Drill interasis : 242x142mm (n. 4 holes of 6mm diameter)
--
NOTE:
to have the cable L = 1.5m it is necessary to
- make the joystick / cable connections 7x0.75mmq by removing the
original connector
- put the corrugated sheath and fix it to the bottom of the joystick (see photo)
- connect the 7x0.75 cable to the Deutsch 6-pin female connector
to male contacts
--
Key Features:
Designed for precision control in forestry applications.
Integrated with Stui Faber Communication for seamless machine interaction.
Robust construction, resistant to dust, dirt, and moisture.
Ergonomic design for comfortable operation over extended periods.
Suited for use with various forestry machinery including felling heads, forwarders, and harvesters.
Upgrade to OTTO Joysticks today and experience the difference in your forestry operations. Optimized control, improved communication, and robust construction make these joysticks a winning choice for any forestry professional.
Please note that the details provided are general and might not fully apply to all OTTO Joystick models. Check the product specifications to ensure the model fits your needs.